The Breadboard Power Supply makes it easy to supply 5V and 3.3V power to components. The Breadboard Power Supply takes in 5V to 12V power via the DC barrel jack and converts it to 5V, 3.3V, and ground pins. It also provides a power switch and an LED light to show that it is powered up.
The Breadboard Power Supply is capable of supplying more power than is available on the 5V, 3.3V, and digital pins on the Arduino. So, if you need to power something like a motor it is best to use the Breadboard Power Supply. You can also use the Breadboard Power supply to power the Arduino itself.
When the Breadboard Power Supply is connected to a breadboard, it also supplies power on the read and blue power rails of the breadboard. To select if it supplies 3.3V or 5V a rail, move the small pin jumper. If the jumper bridges the 3.3V and VCC pins, then it will supply 3.3V. If it bridges the 5V and VCC pins, then it will supply 5V to that rail.
Here is an example showing how to power an Arduino with the Breadboard Power Supply. When powering an Arduino this way, it is important not to connect both the Breadboard Power Supply and the Arduino's USB cable at the same time; providing power from two places can lead to big problems.
For an example on using the Breadboard Power Supply to power both the Arduino and a Stepper Motor, please see the Stepper Motor Driver page.
| Part | Location | On floor | Backstock | |
|---|---|---|---|---|
| 0915 | Drives higher voltage LEDs with adjustable resistance and PWM dimming of connected LED | Output: Light | 7 | 23 |
| 1388 | bench supply, DC, 0–30V at 0–20A, constant current or constant voltage, CSI3020SW | Soldering bench | 1 | 0 |
| 1389 | power supply, 5V 2A output, switching, micro usb output | Special Parts Cabinet | 5 | 0 |
| 1390 | bench supply, DC, two controllable outputs up to 5A at 30V each (constant current or constant voltage), and one constant voltage output: 5V up to 3A | Soldering bench | 3 | 0 |
| 1391 | power supply, 12V 2.5A output, 120V input, switching, 5.5mm center-positive barrel jack output | Wiring 6 | 5 | 26 |
| 1393 | power supply, 5V 2A output, 120V input, switching, 5.5mm center-positive barrel jack output | Wiring 6 | 1 | 0 |
| 1395 | power supply, 5V 3-4A output, 120V input, switching, 5.5mm center-positive barrel jack output | Wiring 6 | 12 | 22 |
| 1397 | power supply, 9V 2A output, 120V/240V input, switching, 5.5mm x 2.5/2.1mm jack, center positive | Wiring 6 | 6 | 5 |
| 4003 | Supplies power to a breadboard, available to be used by electronic components plugged into it. | — | — | 0 |
| 6045 | switching power supply, selectable 3V 4.5V 5V 6V 7.5V 9V 12V outputs | — | — | 0 |
| 8021 | 3-12V variable power supply | Special Parts Cabinet | 0 | — |
| 8023 | 3-6V variable power supply | Special Parts Cabinet | 0 | — |
